Treat Damp Walls Externally
Keeping damp walls externally clean is an important part of the home maintenance process. There are many methods of treating damp walls externally, ranging from caulking to sealing. However, when a damp wall has a serious leak or becomes severely damaged, it can be difficult to determine which method is the best.
Penetrating damp
Having penetrating damp in your home can be a frustrating experience. Often the problem can be traced back to poor building construction or faulty plumbing. However, the problem can also affect more modern properties. Contact housing disrepair solicitors to claim compensation for damp and mould in case your landlord dose not repair the issues.
The problem can be exacerbated by the presence of moisture-repelling coatings on damaged brickwork. However, these coatings can be costly and need to be applied correctly. If you are unsure of the best way to protect your home against damp, you can rely on professional advice.
Using exterior protective paints is a great way to ensure your walls are water-repellent and can breathe from the inside. However, if your walls are old and ill-maintained, they may not be able to dry out properly.
Another common solution for penetrating damp is repointing. Brickwork can deteriorate over time and this can result in spalling. Repointing can be a relatively simple DIY job, but it is best to seek professional advice.
Having a damp proof barrier is another way to combat the problem. Often, these barriers are installed as part of a building’s construction. However, some do not work well and allow moisture to bypass the barrier.
Rising damp
Having damp walls in your home is frustrating. It can damage the interior and exterior of your building, and can also cause problems with respiratory health.
Luckily, there are several ways to treat damp walls. First, it’s important to identify what’s causing the dampness. If you don’t know the cause, you may end up paying for repairs that don’t solve the problem. You may also end up with damp patches that don’t go away.
Secondly, you can try to fix the problem by insulating external walls. This can be done by installing insulation boards that are 100mm thick. You can also add multiple layers of render to the surface.
Third, you can use a damp proof course. If your walls are built using a traditional mortar course, you may need to replace each brick along the course. You can also choose to use an injection damp proof course. Check disrepair compensation calculator to calculate the compensation amount.
Weatherproofing wall coatings
Whether you have a cracked or damp brick wall, a loose render or a wet pebbledash, it’s time to find the right weatherproofing wall coatings to treat these issues externally. The problem with damp walls is that they can cause problems for the home and its inhabitants. They can be a health hazard, leading to breathing problems and asthma. Fortunately, there are solutions for damp walls that are both affordable and effective.
First, it’s important to determine where the problem is coming from. If the wall is below grade, it’s a good idea to add insulated concrete forms to keep moisture from entering your home. However, if the wall is above grade, it’s best to apply a waterproof coating to protect it.
Second, you’ll need to apply a waterproof membrane. There are several different types of membranes. One type is a liquid rubber elastomeric coating. The coating forms a waterproof barrier that dries in about sixty minutes. It’s usually a minimum of 60 millimetres thick. It can be applied to concrete and brick walls.
Cavity wall insulation
Having damp walls externally can be a real problem. There are many reasons why your wall might be damp, and many ways you can treat it. The first step to preventing damp problems is identifying the cause of the problem.
One of the main reasons for damp problems is a lack of ventilation. This means that air is not able to circulate around the wall and the moisture is trapped inside. This leads to mould growth.
Another reason for damp problems is the presence of salts in the plaster. These salts draw moisture from the air and make the wall wet. You can prevent this from happening by adding a salt inhibitor to the plaster.
There are also a number of causes for penetrating damp. This occurs when water gets into the cavity wall through the mortar. In some cases, this can be due to improperly installed cavity wall insulation.
Other causes include a lack of maintenance on the exterior walls. There can also be a lack of weatherproofing. The aging of bricks makes them less effective in keeping out water. In these cases, you should re-render your wall to prevent further moisture build up.
